Miele KF1911VI Manual do Utilizador

Operating and InstallationInstructionsFridge-Freezer CombinationKF 1801 ViKF 1811 ViKF 1901 ViKF 1911 ViTo prevent accidentsand appliance damageread t

Using the settingsThis appliance is operated with the useof touch keys activated by a finger.–An available button will appear white.–A selected button

Custom settingsIn the custom settings mode you canselect and change functions. Thefunction possibilities are described inthe respective chapters of th

^By touching the X button, you canchoose between:= 0 : Button sound is off= 1 : Button sound is on= – : Return to menu.^Touch the access button "

The appliance is equipped with analarm system, to ensure that thetemperature does not rise unnoticedbecause of energy loss or open doors.The alarm sys

Setting the temperature in therefrigerator and freezersectionsThe refrigerator and freezer sectionscan be set independently of each other.^Touch the a

Temperature unit(Fahrenheit/Celsius)The temperature can be displayed indegrees Fahrenheit (°F) or Celsius (°C).^Touch the access button "p"s

The SmartFresh drawers provide theright combination of temperature andhumidity. The result is freshness up tothree times longer than in the otherzones

For optimal storage conditions, it isalways best to store similar foodstogether in one crisper.Foods that are best stored under dryconditions–fresh fi

Different storage zonesDue to the natural circulation of air inthe appliance, there are differenttemperature zones in the refrigerator.Cold, heavy air

Freezing foodFresh food should be frozen as quicklyas possible. This helps maintain thenutritional value, vitamin content,appearance and taste of the

IMPORTANT SAFETY INSTRUCTIONS...4Guide to the Fridge-Freezer combination ...7Before use ...

DefrostingFrozen food can be defrosted indifferent ways:–in a microwave oven,–at room temperature,–in the refrigerator (the cold given offby the froze

When the SuperCool function isactivated, the appliance is cooled asquickly as possible (to a factory-presettemperature).SuperCoolWhen used with the re

For the automatic ice cube maker tooperate, it must be connected to thehousehold water supply. See"Plumbing".Turning on the ice cube maker^M

Refrigerator section andSmartFresh drawersThe refrigerator and SmartFreshdrawers defrost automatically.During normal operation, condensateand frost ca

Moving the shelvesThe shelves can be adjusted accordingto the height of the food.^Using both hands, grasp the shelffrom underneath and lift slightly s

The divider in the drawer can also beremoved for cleaning.^Remove the drawer.^Lift the divider upward and out.To re-insert the divider, slide it backd

Adjusting the door shelvesFor easier loading, unloading, andcleaning, the door shelves can beshifted or completely removed.^ Using both hands, grasp t

Ice cube containerThe ice cube container is set ontelescopic tracks, and can be removedfor loading, unloading and cleaning.^Slide the container forwar

To reduce the risk of electricalshock, disconnect the appliancefrom the power supply by shuttingoff the power main, tripping thecircuit breaker or unp

Before cleaning^Use the main switch to turn theappliance off completely.The main switch is located on the rightside underneath the control panel.^Unpl

Water filter ...33Water filter change indicator ...33Exchangi

Humidity filtersThe two humidity filters, located abovethe SmartFresh drawers, must beremoved for cleaning.^ Remove the SmartFresh drawer.^ Unhook the

After cleaning^Return all shelves and accessories.^Place food back in the refrigeratorsection, close the appliance doors,insert the plug in the power

Never touch a halogen bulb withbare fingers.When inserting a glass halogen bulbalways hold it with a soft cloth.^ Remove the defective light bulb.^ Pl

The Appliance is supplied with anactive charcoal filter which improvesthe taste and smell of ice cubes byremoving chlorine and othersubstances from th

Exchanging the water filterNote: Air trapped in the system maycause water and the filter cartridgeto eject forcefully. Use caution whenremoving.^ Push

^After the filter change the filterindicator in the display still flashes.The change must be be confirmed inthe electronic.Confirming the filter chang

Water filter36State of CaliforniaDepartment of Public HealthWater Treatment DeviceCertificate NumberDate Issued: March 10, 2006Trademark/ModelDesigna

Water filter37To a capacity of 739.68 gallons (2800 liters).* Based on the use of Cryptosporium parvum oocystsPerformance Data Sheet For Filter Model

This product KF 1801 Vi, KF 1811 Vi (KIMBM30US) / KF 1901 Vi, KF 1911 Vi(KIMBM36US) is tested and certified by WQA against ORD0902 for California"

With the aid of the following guide minor problems can be corrected without a ser-vice call.Repairs should only be carried out by a qualified and trai

When using the appliance, followbasic safety precautions, includingthe following:Read all instructions beforeinstallation and use to preventaccidents

Problems with temperatureIssue Possible fault SolutionThe freezer section istoo warm.The room temperature islower than the ambienttemperature for whic

General problemsIssue Possible fault SolutionWater is flowing out ofthe appliance.Close the shut-off valve immediately.Check whether the waterpipe in

Alarm / Indicator warningsIssue Possible fault SolutionThe alarm is ringing. The appliance door(s)have been open forlonger than 5 minutes.Close the do

Problems with the ice makerIssue Possible fault SolutionThe ice cube makerwill not switch on.The appliance is notplugged in.Check that the applianceis

Problems with the ice makerIssue Possible fault SolutionThe ice cubes aresmall.Other domestic appliancesthat use water are inoperation.Avoid using suc

Problems with the ice makerIssue Possible fault SolutionThe ice maker is notproducing enough iceor the ice cubes aremisshapen.Check the waterpressure.

The appliance is making noises.Issue Possible fault SolutionBrrrrr... Humming noise made by thecompressor. This noise can getlouder for brief periods

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this bo

48

Installation instructionsInformation is subject to change. Please refer to our website to obtain the mostcurrent product specification, technical &

InstallationThis appliance is top-heavy andmust be secured to prevent thepossibility of tipping forward.Keep the doors closed until theappliance is co

Disposal of packing materialsThe cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle.Ensure that any plastic wrappings,

Have the appliance installed by aqualified technician, according tothe enclosed installation instructions.,WARNINGThis appliance is top-heavy andmust

BaseA fully loaded appliance is very heavy.The load-bearing capacity of your floormust meet the following requirements:KF 18X1 Vi ...950lbs(431

Stainless steel panelsStainless steel door panels and toe-kickcovers are available from Miele.Custom door panelsThis appliance is compatible with alls

Installation with partition using the"Merging Kit"The minimum thickness of the partitionis5/8" (16 mm).If there is a partition with a t

Adjusting the door openingangle (optional accessory)Depending on the installation site, itmay be necessary to adjust the dooropening angle to 90°.^Ope

Door dimensions (opening angle 90°)*The dimensions of the door frontsand handles will vary according toeach individual kitchen.3/8" (10 mm)ABCKF

Niche dimensionsNiche width (A)KF 1801 Vi, KF 1811 Vi 30" (762 mm)KF 1901 Vi, KF 1911 Vi 36" (915 mm)Dimensions57

Power supply and water connection1. Power supply2. Water connectionAKF 18X1 Vi 15" (381 mm)KF 19X1 Vi 18" (458 mm)Door front dimensionsABCKF

Before you beginRead these instructions completelyand carefully.Have the appliance installed by aqualified technician, according tothe enclosed instal

~After your appliance is in operation,do not touch the cold surfaces in themachine, ice cubes or frozen food,particularly when hands are damp orwet. S

Aligning the housing unitThe housing unit must be carefullyaligned using a spirit level beforeinstalling the appliance. The unitcorners must be at rig

^Do not remove the installationsupports from the appliance doors.They will be used later in theinstallation niche.There are transportation safetydevic

^Push the module into the slot until itlocks into place.^Connect the appliance to the powersupply and turn it on. After severalseconds the indicator l

Mounting AccessoriesThe mounting accessories needed forinstalling the appliance into the nicheare included in the packaging. Severalplastic bags are i

^Drill pilot holes:–1/8"(3mm)for5x60mmwoodscrews–1/16"(2mm)for4x15mmwoodscrews.^ Tightly secure the anti-tip brackets inthe niche.Be certain

Securing an alternative anti-tipdeviceIf the anti-tip brackets cannot beattached securely, an alternativeanti-tip device can be used.Ensure that there

Sliding the appliance into theinstallation nicheIf a side-by-side installation isdesired, connect the two appliancestogether. See the Installation Man

Aligning the appliance^Align the appliance with the customfront.The installation aids e on theappliance door have been designed forthe following custo

Note:–The adjustment of the rear feet isaided if the appliance is lifted at therear (tipped forward slightly).Attaching the appliance to theinstallati

^ If necessary, shorten the filler strip jto the required height.^ Place the 2 strips on top of eachother k.^ Insert the filler strip until you hear i

a Hinged door shelfb Shelves (height adjustable)c Door shelves (height adjustable)d Floating drawere Control panelf Humidity filterg Main switch to tu

Now connect the water supply to theappliance (see "Plumbing").Preparing the custom doorFor best results, it is important tomount the upper d

^ Mark the distance X on the back-sideof the custom door.^ Also calculate and mark the center ofthe custom door Y.^ Remove the mounting frame from the

Attaching and aligning thecustom door front^ Open the door and hang the customdoor with the mounting frame overthe threaded bolts p.^ Put the side str

Note the size of the upper custom doorfront:^ Measure the distance Y between theadjusting rail from the lower door andthe upper door.^ Be sure to leav

Attaching the covers^ To mount the cover strips on bothsides of the upper and lower doors,click them into place from bottom totop, into the gap betwee

^Insert the cover plate on the freezercompartment door.Attaching the toe-kick coverThe maximum height of the toe-kickcover is 4" (101 mm) from th

Mounting the air separatorThe air separator keeps the supply andexhaust air separate. This preventswarm exhaust air from flowing into themachine, opti

All plumbing work should be carriedout by a suitably qualified andcompetent person, in accordancewith all applicable local and nationalregulations.The

Preparing the water connectionThe connection to the householdwater supply must be installedbefore the appliance is installed.^Turn off the main water

Connecting the water supplyWhen connecting the water pipe tothe solenoid valve of the appliance,follow the instructions supplied bythe manufacturer of

Control panela Access button "p"activates the control panelb Refrigeratorc Left SmartFresh drawerd Right SmartFresh drawere Freezerf Tempera

,Avoid the risk of electricalshock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extension

Miele's RemoteVision Wi-Fi technologycreates a 'virtual link' between yourappliance and our monitoring center. Ifa fault occurs, Miele&

Accessing the RemoteVisioncontrol panel^Touch the access button "p"soitturns yellow.^Note the position of the X button, butdo not touch.^Tou

MasterCool control panel options for RemoteVisionStatus indicators Description of functionFlashing ; ~ Module booting phaseFlashing ; ‡ Not connected

Alteration rights reserved / 3712INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOSTCURRENT PRODUCT SPECIFICATIONS, TECHN

Before using for the first time^Clean the inside of the appliance andthe accessories with a mild solutionof warm water and liquid dish soap.Dry with a