Miele CS 1012-1 Manual de Serviço descarregar pdf (Página 45)

After changing the jets

^

Reassemble the burner parts in the

reverse order.

^

Check all gas fittings for leaks by

operating the burner without the

upper section of the hob in place

(use a match to ignite the flame).

^

Remove the loose burner parts again.

^

Replace the upper section of the

hob.

^

Screw the burner bases into place,

and replace the other parts of the

burner. Take care to reassemble the

different parts in the correct order.

^ Replace the control knobs.

^ Finally ignite all the burners to check

that they are operating correctly.

The flame must not go out on the lowest

setting, or when the control is turned

quickly from a high to a low setting.

On the highest setting, the flame must

have a distinctive and visible core.

^

Stick the label supplied with the jets

above the label stating the type of

gas being used.

Conversion to another type of gas

45

1 2 ... 40 41 42 43 44 45 46 47 48

Comentários a estes Manuais

Sem comentários