Miele CS 1312 BG Manual de Instalação descarregar pdf (Página 25)

Fit the wall units and extractor hood

before fitting the barbecue grill to

avoid damaging the surface.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

This appliance may only be used in

mobile installations such as ships, if a

risk assessment has been carried out

by a suitably qualified engineer.

The barbecue grill must not be

installed directly next to a

salamander (CS 1421). It is essential to

maintain a distance of at least 150 mm

between these two appliances.

After installing the grill, ensure that

the connection cable is without

hindrance and that there is no

mechanical obstruction which could

damage it, e.g. when draining the

appliance.

Ensure that the electrical cable is

installed in such a way that it does not

touch any parts of the appliance which

become hot. The cable will be

damaged by extreme heat.

Observe carefully the safety

distances given on the following pages.

Do not use any sealant except

where expressly instructed to do so.

The seal underneath the appliance

provides a sufficient seal for the

worktop.

All dimensions in this instruction booklet

are given in mm.

Safety instructions for installation

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Sem comentários

Miele CS 1312 BG Manual de Instalação Página 25