Miele GAS COMBISET CS 1011 Instruções de Operação descarregar pdf (Página 47)

After changing the jets

Reassemble the burner parts in the

reverse order.

Check all gas fittings for leaks by

operating the burner without the

upper section of the cooktop in place

(use a match to ignite the flame).

Remove the loose burner parts again.

Replace the upper section of the

cooktop.

Screw the burner bases into place,

and replace the other parts of the

burner. Take care to reassemble the

different parts in the correct order.

^ Replace the control knob.

^ Finally ignite all the burners to check

that they are operating correctly.

The flame must not go out on the lowest

setting, or when the control is turned

quickly from a high to a low setting.

On the highest setting, the flame must

have a distinctive and visible core.

Adhere the label supplied with the

jets above the label stating the type

of gas being used.

Conversion to another type of gas

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

Sem comentários

Miele GAS COMBISET CS 1011 Instruções de Operação Página 47