Miele INDUCTION WOK CS 1223 Manual do Utilizador descarregar pdf (Página 27)

Fit the wall units and extractor hood

before fitting the appliance to avoid

damaging the surface.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

This appliance may only be used in

mobile installations such as ships if a

risk assessment of the installation has

been carried out by a suitably qualified

engineer.

After installation, ensure that the

connection cable is without hindrance

and that there is no mechanical

obstruction which could damage it,

such as a drawer.

If an interim shelf is installed under

the appliance, there must be a

minimum gap of 40 mm between the

top of the shelf and the underside of the

appliance.

This appliance must not be installed

over a dishwasher, washing machine,

tumble dryer, refrigerator or freezer.

The high temperatures radiated by

hobs could damage the appliance

below.

Spray canisters, aerosols and other

inflammable substances should not be

stored in a drawer under the hob.

Cutlery inserts must be heat-resistant.

All dimensions in this instruction booklet

are given in mm.

Safety instructions for installation

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Sem comentários

Miele INDUCTION WOK CS 1223 Manual do Utilizador Página 27