Miele KM 542 Instruções de Operação descarregar pdf (Página 73)

Installing the cooktop

Preparing the worktop

^

Make the worktop cut-out according

to the dimensions given in the

building-in diagram. Remember to

maintain the minimum safety

distances (see "Safety instructions

for installation").

^

Seal the cut surfaces with a suitable

heat-resistant sealant to avoid

swelling caused by moisture.

Make sure that the sealant does not

come into contact with the top of the

worktop.

No spring clamps are needed to

install the cooktop. The seal

underneath the cooktop will hold it

securely on the worktop.

Any gap between the frame and

worktop will reduce with time.

Connecting the mains cable to the

appliance

The mains cable must only be

connected to the appliance by a

qualified and competent electrician

in strict accordance with current

local and national safety regulations.

^

Follow the instructions in the wiring

diagram (see "Electrical connection -

Wiring diagram").

Installing the cooktop

^

Feed the mains connection cable

down through the cut-out.

^

Place the cooktop centrally in the

cut-out. When doing this, make sure

that the seal under the cooktop sits

flush with the worktop on all sides.

This is important to ensure an

effective seal all round.

Do not use sealant (e.g. silicone).

If the seal does not meet the worktop

correctly on the corners the corner

radius (ß R4) can be carefully

scribed to suit.

^ Connect the cooktop to the mains.

^ Check that the cooktop works.

Cooktop with frame or bevelled edge

73

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 83 84

Comentários a estes Manuais

Sem comentários