Miele KM 5731 Manual de Instalação descarregar pdf (Página 53)

Installation above an oven

a Ventilation gap for the fan

when installed in a base unit without

a back panel.

When installed above a Miele oven

in a worktop thickness 0 40 mm the

minimum ventilation gap for the fan

of 15 mm is present.

If the worktop is ß 40 mm, a filler

panel will have to be fitted above the

oven.

b Top of oven

c Induction hob fan

d Distance between the front edge of

the fan and the worktop cut-out

(depending on the type of hob)

If the hob is installed in an island or in a

unit with an enclosed back panel, the

above measurements apply to a total

depth 0 800 mm. If the total depth is

less than 800 mm, then a minimum gap

of 100 mm must be provided for

ventilating the fan. In this case it is

advisable to fit a fixed drawer panel.

Installation

53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 71 72

Comentários a estes Manuais

Sem comentários