Miele KM6328-1 Manual do Utilizador descarregar pdf (Página 59)

Flush-fitted hobs

Preparing the worktop

 Mak

e the worktop cut-out as shown

in "Building-in dimensions". Observe

the safety distances (see "Safety dis‐

tances").

 Soli

d wood, tiled and glass worktops:

Fix the wooden frame  7 mm below

the top edge of the worktop (see dia‐

gram).

Connecting the mains connection

cable t

o the appliance

The mains connection cable must

ly be connected by a suitably

qualified and competent person.

 Follow the instructions in the wiring

diagram (see "Electrical connection -

Wiring diagram").

Installing the hob

 F

eed the mains connection cable

down through the cut-out.

 Centre the hob in the cut-out.

 Co

nnect the hob to the mains.

 Check that the hob works.

 Seal the r

emaining gap  with a sili‐

cone sealant that is heat-resistant to

at least 160°C.

For natural stone worktops and natu‐

al stone tiles, only use silicone seal‐

ant that is specially formulated for

natural stone, and observe the seal‐

ant manufacturer's instructions.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 67 68

Sem comentários

Miele KM6328-1 Manual do Utilizador Página 59