Miele KM6363-1 Manual descarregar pdf (Página 54)

Flush-fitted hobs

54

Preparing the worktop

 Make the worktop cut-out as shown

in "Building-in dimensions". Observe

the safety distances (see "Safety dis‐

tances").

 Solid wood, tiled and glass worktops:

Fix the wooden frame  7 mm below

the top edge of the worktop (see dia‐

gram).

Connecting the mains connection

cable to the appliance

The mains connection cable must

only be connected by a suitably

qualified and competent person.

 Follow the instructions in the wiring

diagram (see "Electrical connection -

Wiring diagram").

Installing the hob

 Feed the mains connection cable

down through the cut-out.

 Centre the hob in the cut-out.

 Connect the hob to the mains.

 Check that the hob works.

 Seal the remaining gap  with a sili‐

cone sealant that is heat-resistant to

at least 160°C.

For natural stone worktops and natu‐

ral stone tiles, only use silicone seal‐

ant that is specially formulated for

natural stone, and observe the seal‐

ant manufacturer's instructions.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Comentários a estes Manuais

Sem comentários