Miele KM 2334 Instruções de Operação descarregar pdf (Página 38)

Make the worktop cut-out for the

cooktop in accordance with the

building-in diagram. Remember to

maintain a minimum safety distance

(see "Safety instructions for

installation").

Seal the cut surfaces with a suitable

heat-resistant sealant to avoid

swelling caused by moisture.

Make sure these materials do not

come into contact with the surface

of the worktop.

^ Feed the connection cable down

through the cut-out.

^ Place the cooktop in the cut-out

without securing it.

If, during installation, you find that the

seals on the corners are not flush

with the worktop, the corner radii ß

R4, can be carefully scribed to fit.

^ Connect the cooktop to the mains

electricity supply (see "Electrical

connection").

Connect the appliance to the gas

supply (see "Gas connection").

Secure the appliance at the front and

rear using the brackets supplied.

Installation

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Sem comentários

Miele KM 2334 Instruções de Operação Página 38