Miele KM 460 Manual do Utilizador descarregar pdf (Página 10)

KM 465 / KM 466

a Spring clamps

^ Make the worktop cut-out following

the dimensions shown above.

^

Remember to maintain a minimum

safety distance of 50 mm between

the hob and the back wall and a side

wall to the right or left of the hob. See

"Warning and Safety instructions".

^

Seal the cut surfaces with a suitable

sealant to avoid swelling caused by

moisture.

The materials used must be heat re

-

sistant.

b Depth for building in including the

electrical connection box located at

the rear on the right hand side

approx. 53 mm.

If during installation the corners of

the frame are not flush with the

worktop surface, the corner radius,

Max R4 can be carefully scribed to

suit.

Appliance dimensions and worktop cut-out

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comentários a estes Manuais

Sem comentários